Siemens SIMATIC IPC377E Operating Instructions Manual Download Page 67

Page: 67 / 124

SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA

Technical specifications

8.1

Certificates and approvals

Note
Applicability
The following shows the approvals that may be available. For the device itself, it is

certificated as shown on the product label and package label.

ISO 9001 certificate

The SEWC quality management system for all production processes (development,

production and sales) meets the requirements of GB/T 19001-2008/ISO 9001:2008, ISO

14001:2004 + Cor. 1:2009 and BS OHSAS 18001:2007.
This has been certified by TUV.
Certificate registration no. 01 100 1430201, 01 104 1430201 and 01 113 1430201.

Software license agreements

If the device is supplied with preinstalled software, you must observe the corresponding

license agreements.

CE marking

2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on

the harmonisation of the laws of the Member States relating to electromagnetic compatibility;

Official Journal of the EU L96, 29/03/2014, p. 79–106

EMC

EN 61000-6-4:2007 + A1:2011, EN 61000-6-2:2005

Software license agreements

If the device is supplied with installed software, observe the corresponding license

agreements.

Summary of Contents for SIMATIC IPC377E





























































































































Search results

Summary of Contents for SIMATIC IPC377E

Reviews:

Brands by name

Popular brands

Siemens SIMATIC IPC377E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC377E

Reviews:

Brands by name

Popular brands