Siemens SIMATIC IPC377E Page 57 Operating Instructions Manual Download

Page: 57 / 124

Maintaining and repairing the device

7.6 Installing the software

SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA

The Recovery DVD is included in the scope of delivery when you have ordered a device with

operating system. The DVD contains an image file with the following software:

●

The installation program for installing the operating system with the supported languages

●

The tools for setting up the drives

The basic language of the installed operating system is English. If additional languages are

required, install these from the recovery DVD.
"Documentation and Drivers" DVD
The "Documentation and Drivers" DVD contains the documentation and the hardware

drivers.
Restore DVD
The restore DVD is included in the scope of delivery when you have ordered a device with

operating system. The restore DVD includes:
Operating system with installed hardware drivers

7.6.1.2

Restoring the delivery state

You can restore the original factory software using the Restore DVD. The DVD contains the

necessary images and tools for transferring the factory software to the drive of your device.

Restoration of the entire driver C: (system) and D: or only drive C: is possible. This allows

you to retain any user data on drive D:.

Retrieving authorization or license

●

Check whether you can retrieve your authorization or license key from the disk and

perform this procedure if possible.

●

If backup is not possible, please contact Customer Support. There you can obtain

information necessary for software authorization.

Requirement

●

You need the Restore DVD for the operating system you want to install. It is included in

the product package.

●

You need to connect a mouse and a keyboard to your PC.

●

You also need an USB DVD drive to your PC.

Procedure

Insert the Restore DVD into the USB DVD drive.

Reboot the device.

Press the Delete key and set USB CD/DVD as the priority 1 in the boot menu.

Reboot the device.

Click Next to enter the start the restoration.

Summary of Contents for SIMATIC IPC377E





























































































































Search results

Summary of Contents for SIMATIC IPC377E

Reviews:

Related manuals for SIMATIC IPC377E

Brands by name

Popular brands

Siemens SIMATIC IPC377E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC377E

Reviews:

Related manuals for SIMATIC IPC377E

Brands by name

Popular brands