Siemens SIMATIC IPC377E Page 53 Operating Instructions Manual Download

Page: 53 / 124

Maintaining and repairing the device

7.4 Recycling and disposal

SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA

Cleaning Agents

NOTICE
Damage to the HMI device caused by impermissible cleaning agents
Impermissible and unsuitable cleaning agents may cause damage to the HMI device.
Use dish soap or foaming screen cleaner only as cleaning agents. Do not use the following

cleaning agents:

•

Aggressive solvents or scouring powder

•

Steam jets

•

Compressed air

Cleaning the Device Front

Switch off the device.

Dampen the cleaning cloth.

Spray the cleaning agent on the cloth and not directly on the device.

Clean the device with the cleaning cloth.

7.4

Recycling and disposal

The devices described in these operating instructions can be recycled thanks to their low

level of pollutants. Contact a certified disposal service company for environmentally sound

recycling and disposal of your old devices.

Summary of Contents for SIMATIC IPC377E





























































































































Search results

Summary of Contents for SIMATIC IPC377E

Reviews:

Related manuals for SIMATIC IPC377E

Brands by name

Popular brands

Siemens SIMATIC IPC377E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC377E

Reviews:

Related manuals for SIMATIC IPC377E

Brands by name

Popular brands