manualshive.com logo in svg

Siemens SIMATIC IPC377E, Operating Instructions Manual

Share
Download
Siemens SIMATIC IPC377E Operating Instructions Manual Download Page 37

 

SIMATIC IPC377E 
Operating Instructions, 2017/05, A5E40965249-AA 

37

 

 

Commissioning the device and device functions 

4 

4.1

 

General information on commissioning 

 

 

CAUTION 

Danger of burns 
The surface of the device can reach temperatures of over 70 °C. Any unprotected contact 

may cause burns. 
Avoid direct contact during operation of the device. Touch the device only with appropriate 

protective gloves. 

 

 

Note 
Windows Embedded Standard 7 
Read the EWF and FBWF information 
Two configurable write filters (Enhanced Write Filter and File Based Write Filter) are 

provided with Windows Embedded Standard. Read the EWF/FBWF information if you 

activate and use them, otherwise you may experience data loss. 

 

 

Note 
Configuring memory cards in the device 
Memory cards used in a device need to be configured on that device. Memory cards 

configured on other devices will not boot as the drive parameters will be different. 

 

Requirement 

●

 

The device is connected to the power supply. 

●

 

The protective conductor is connected. 

●

 

The connection cables are plugged in correctly. 

●

 

The following hardware is available for initial commissioning: 
–

 

One USB keyboard 

–

 

One USB mouse 

Summary of Contents for SIMATIC IPC377E





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands