Siemens SIMATIC IPC327G Operating Instructions Manual Download Page 46

Page: 46 / 95

Maintaining and repairing the device

6.4 Reinstalling the operating system

SIMATIC IPC327G

Operating Instructions, 09/2021, A5E51366275-AA

Procedure-Installing the memory module

Follow above steps in reverse order to install the memory module.

Note

Do not touch or remove the CPU TIM on the inside of the housing when installing the

motherboard back into it. Otherwise, it may result in CPU malfunction.

①

M.2 NVMe/ SATA SSD TIM

②

CPU TIM

6.4

Reinstalling the operating system

Information on installation of the operating system is available on the Internet:
•

Microsoft® Windows® 10

(

https://support.industry.siemens.com/cs/ww/en/view/109749498

)

6.4.1

Installing the drivers and software

Requirements

•

Windows 10 operating system is installed in your IPC.

•

You need to connect a mouse, a monitor and a keyboard to your PC.

•

You also need the

supplied USB stick to your PC.

Summary of Contents for SIMATIC IPC327G
































































































Search results

Summary of Contents for SIMATIC IPC327G

Reviews:

Siemens SIMATIC IPC327G, Operating Instructions Manual, Page: 46 / 95

Search results

Summary of Contents for SIMATIC IPC327G

Reviews: