Siemens SIMATIC IPC227G Operating Instructions Manual Download

Page: 56 / 106

Maintaining and repairing the device

6.5 Recycling and disposal

SIMATIC IPC227G

Operating Instructions, 06/2021, A5E50059933-AA

Step 7: install the Graphics Command Center

Click

Step7: Intel® Graphics Command Center

Click to install the Intel® Graphics Command Center.

Click

Yes

to confirm the user account control question.

Click

Yes

to continue.

Click

Finish

The installation is completed.

6.5

Recycling and disposal

Due to their low level of pollutants, the devices described in these operating instructions can

be recycled. Contact a certified disposal service company for environmentally sound recycling

and disposal of your old devices.

Summary of Contents for SIMATIC IPC227G











































































































Search results

Summary of Contents for SIMATIC IPC227G

Reviews:

Related manuals for SIMATIC IPC227G

Brands by name

Popular brands

Siemens SIMATIC IPC227G, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC227G

Reviews:

Related manuals for SIMATIC IPC227G

Brands by name

Popular brands