Siemens SIMATIC IPC227G Operating Instructions Manual Download

Page: 10 / 106

Overview

1.2 Structure of the devices

SIMATIC IPC227G

Operating Instructions, 06/2021, A5E50059933-AA

The 240G/480G SSD has the Power loss protection (PLP).

These configurations are not released in the current version. For the detailed configura-

tion, refer to the Technical data (Page 66).

In the BIOS setup, you can configure support of RS232/RS422/RS485 for each COM port.

DP++ is a DisplayPort Dual-Mode, and it supports HDMI/DP signal output.

MUI: Multi-language user interface; More language packages are available on the USB

stick. You can install them according to your request.

1.2

Structure of the devices

1.2.1

Views of the device

Front view and side view

The front view on the left is the standard mounting position. The side view is on the right.

①

Cooling fins

②

LED display

Summary of Contents for SIMATIC IPC227G











































































































Search results

Summary of Contents for SIMATIC IPC227G

Reviews:

Related manuals for SIMATIC IPC227G

Brands by name

Popular brands

Siemens SIMATIC IPC227G, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC227G

Reviews:

Related manuals for SIMATIC IPC227G

Brands by name

Popular brands