Siemens SIMATIC IPC BX-39A Operating Instructions Manual Download

Page: 44 / 115

Installing and connecting the device

3.3 Connecting the device

SIMATIC IPC BX-39A

Operating Instructions, 07/2022, A5E50715883-AA

3.3.5

Connecting the device to networks

The following options are available for the integration in existing or planned system

environments or networks:

Ethernet

You can use the integrated Ethernet interfaces (10/100/1000 Mbps) for communication and

data exchange with automation devices, e.g. SIMATIC S7.
You need the "SOFTNET S7" software package for this.

PROFINET

PROFINET can be operated via:
•

Standard Ethernet interfaces (RT)

SIMATIC NET

Use this software package to create, operate and configure an innovative network for Field &

Control level. You can find information on this under SIMATIC NET

(

http://w3.siemens.com/mcms/automation/en/industrial-

communications/Pages/Default.aspx

The software package and the documentation are not included in the scope of delivery.

Additional information

You can find additional information on the Internet at: Technical Support

(

https://support.industry.siemens.com

Summary of Contents for SIMATIC IPC BX-39A




















































































































Search results

Summary of Contents for SIMATIC IPC BX-39A

Reviews:

Related manuals for SIMATIC IPC BX-39A

Brands by name

Popular brands

Siemens SIMATIC IPC BX-39A, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC BX-39A

Reviews:

Related manuals for SIMATIC IPC BX-39A

Brands by name

Popular brands