Comfort Panels INOX, ITC INOX
Compact Operating Instructions, 08/2022, A5E33472156-AP
13
Installing and connecting the device
3
3.1
Mounting instructions
The technical specifications given for the device are guaranteed under these conditions:
•
The device is installed by qualified personnel.
•
Installation takes place according to the available documentation.
3.2
Preparing for installation
3.2.1
Check the scope of delivery
Check the scope of delivery for visible signs of damages caused during transport and for
completeness, see chapter "Scope of delivery (Page 8)".
NOTICE
Damaged parts
A damaged part can cause device malfunctions.
Do not install damaged parts.
In the case of damaged parts or incomplete delivery, contact your Siemens representative.
3.2.2
Checking the operating conditions
Note the following aspects before installing the device:
1.
Familiarize yourself with the standards, approvals, EMC parameters and technical
specifications for operation of the device. This information is available in the following
chapters:
–
"Certificates and approvals (Page 26)"
–
"Electromagnetic compatibility (Page 32)"
2.
Check the mechanical and climatic ambient conditions for operation of the device; see
Classification of environmental conditions (Page 43).
3.
Follow the notes on use in the operating instructions.
