Configuring the operating system
6.4 Changing settings for operation
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
141
The appearance of the dialog box changes:
①
Button for closing the screen keyboard
②
Button for saving the screen keyboard settings
1.
If you want to switch between the numeric and alphanumeric screen keyboard, press
the
key.
2.
If you want to change the position of the screen keyboard, move it using the
icon.
Release contact from the icon when the required position is reached.
3.
If you want to increase the size of the screen keyboard, enlarge it to the size required
using the icon. Release contact from the icon when the required size is reached.
4.
If you want to save the settings, press the "Save" button.
5.
Close the screen keyboard by pressing the "Close Input Panel" button.
6.
Confirm your entries.
The dialog closes.
Result
The screen keyboard settings have been modified.
See also
Operating the Control Panel (Page 137)
6.4.2
Setting the character repeat rate of the screen keyboard
Introduction
You can set the character repeat for the screen keyboard in the Control Panel.
Requirements
You have opened the "Keyboard Properties" dialog with the "Keyboard"
icon.
