Commissioning the device
4.3 Parameter assignment for Comfort Panel
Comfort Panels
110
Operating Instructions, 07/2017, A5E36770603-AB
4.3.7.2
Setting the proxy server
Use this function to configure the type of Internet access.
Requirement
●
The Control Panel is open.
●
Your system administrator has provided you with the necessary information.
Procedure
1.
Open the "Internet Options" dialog using the "Internet Options" icon.
2.
Change to the "Connection" tab.
①
LAN dial-up
②
LAN configuration
3.
If you want to use LAN without automatic dial-up, select the "Use LAN (no autodial)"
check box.
4.
If you want to use LAN with automatic dial-up, clear the "Use LAN (no autodial)" check
box and select the required name in the "Autodial name" list box.
5.
If you are using a configuration script, select the "Use configuration script" check box in
the "Settings" group.
Enter the address of the script.
6.
If you are using a proxy server, select the "Use a proxy server" checkbox.
Specify the address and port of the proxy server. Only the start of the addresses is
required. Separate the addresses with a semicolon.
7.
To use a local address, select the "Bypass for local addresses" check box.
8.
Confirm your entries with "OK".
The dialog closes.
The parameters for the LAN connection have been assigned.
