manualshive.com logo in svg

Siemens SIMATIC HMI Industrial Thin Client ITC1200, Operating Instructions Manual

Share
Download
Siemens SIMATIC HMI Industrial Thin Client ITC1200 Operating Instructions Manual Download Page 24

Installing and connecting the device 

 

3.3 Mounting the device 

 

Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200 

24

 

Operating Instructions, 04/2013, A5E03474888-02 

3.3

 

Mounting the device 

Position of the mounting clamps    

To achieve the degree of protection for the device, you need to comply with the mounting 

clamp positions listed below.  
The positions of the mounting clamps are marked by stamps on the cutouts. Fit mounting 

clamps in all the stamped cutouts. 
The following table shows the type, number and position of mounting clamps needed for the 

various devices. 

 

Mounting clamps 

Device 

Type 

Quantity

Position on the device 

ITC1200 

Aluminum mounting clamps 

 

12 

,7&

 

ITC1500 
ITC1900 
ITC2200 

Steel mounting clamps 

 

12 

,7&
,7&

,7&

Requirement 

●

 

All packaging components and protective films have been removed from the device. 

●

 

To install the device, you need the mounting clamps from the accessory kit. 

●

 

Ensure that the mounting seal is attached to the device. 

Summary of Contents for SIMATIC HMI Industrial Thin Client ITC1200





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands