
7-2
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
7.1
Installation and Wiring
You can find information about how to install your module:
S
In Chapter 3 of this manual
S
In the manual S7-400/M7-400 Programmable Controller, Hardware and
Installation
You can find information about how to wire your module:
S
In Chapter 4 of this manual
S
In the manual S7-400/M7-400 Programmable Controller, Hardware and
Installation
The checklist below will help you check important steps in the installation
and parameterization of the FM 453 positioning module.
Table 7-1
Installation and Wiring Checklist
Step
Check
What to Do:
OK
n
1
Slots
Plug the module into one of the suitable slots.
2
Shielding
Check the shielding of the FM 453 positioning module:
S
To ensure proper shielding, the module must be screwed down firmly
on the rack.
S
The shielding for shielded lines must be connected to the shielding termi-
nal element.
S
The shielding for the setpoint cable should not be grounded on the drive-
unit end.
3
Hardware limit
switches
Check the start/stop hardware limit switches. The hardware limit switch con-
nections must be connected to the power section. The start/stop hardware
limit switches should not be connected to the digital inputs.
4
Parameterize
Make sure the FM 453 positioning module setup is consistent with the para-
meterization. Check in particular that:
S
The attached encoder matches the machine data.
S
The wiring of the digital I/O modules matches the machine data.
Installation
Information
Wiring Information
Checklist
Starting up the FM 453
Summary of Contents for SIMATIC FM 453
Page 6: ...vi FM 453 Servo Drive Step Drive Positioning Module C79000 G7076 C453 01 Preface ...
Page 14: ...xiv FM 453 Servo Drive Step Drive Positioning Module C79000 G7076 C453 01 Table of Contents ...
Page 378: ...Index 6 FM 453 Servo Drive Step Drive Positioning Module C79000 G7076 C453 01 Index ...