Siemens Simatic Field PG, Manual

Page: 105 / 142

Reinstallation of the Software
8-5
SIMATIC Field PG Manual
A5E00075760-04
6. To format the partition from the Recovery CD, as described above in steps 1 to
3, reboot and then format drive C: with the “Format” program. Enter:
”A:\>Format C:”
(A: is the CD-ROM drive).
Creating an Extended FAT 32 Partition
In order to create an extended partition you have to boot from the Recovery CD as
described above in steps 1 to 4.
Create an extended DOS partition for the rest of the disk space.
Under Windows 2000, the FAT 32 file system can be changed to a NTFS file
system with the “Format” function.
8.2.3 Creating Partitions under Windows NT
After installing a new hard disk it is necessary to create partitions when they
partitions have errors or need to be changed.
Caution
By deleting or creating partitions all saved data is lost on the hard disk. All drives
on the hard disk will be erased.
The hard disk is delivered with the following installed (only for versions delivered
with Windows NT):
– a partition of with the FAT16 file system with 2045 Mbytes,
– a partition of with the NTFS file system.