Siemens SIMATIC Field PG M6 Operating Instructions Manual Download Page 47

Page: 47 / 120

Commissioning the device

5.7 Operating modes

SIMATIC Field PG M6
Operating Instructions, 12/2018, A5E43198909-AA

5.7

Operating modes

In accordance with the settings in the Windows Power Options, the Field PG supports

different operating states. You can manually or automatically, after a particular time interval,

put the device in the following operating states:

●

Standby mode (Save to RAM)

●

Hibernation (Hibernate, save to disk)

●

Off

Parameterize the possible operating modes of the device to the following actions in the

power options:

●

Operating the on/off button

●

Shutting down the operating system (Windows)

●

Opening and closing the display lid

●

Inactivity of keyboard and mouse

Reactivating the device after standby mode or hibernation

In standby mode the corresponding status indicator for the system flashes; in hibernation

mode all status indicators are switched off. To reactivate the Field PG after these two

operating modes, press the on/off button briefly.

Parameterize the change to the different operating states

In Windows you can set parameters for the time interval and the actions for change to a

different operating mode in the power options. Select:

●

"Control Panel\All Control Panel Items\Power Options".

Before changing the power options, make a note of the factory settings, if necessary.

Note
Deactivating Hibernation or Standby mode
By changing the power settings, and by adding extra hardware (such as USB-components)

or software to the device, you can modify the operating modes so that the device cannot

switch to Hibernation or Standby mode. Even though the screen display is dark, relevant

consumers remain switched on in the device.

Operating modes during transportation of the device

Please remember to always shut down the Field PG or set it to Hibernation prior to

transporting it in the backpack. You can recognize these states by the fact that all device

status indicators are switched off after removing the power supply. This way you can ensure

the device is not switched on and the battery is not unintentionally discharged during

transportation.

Summary of Contents for SIMATIC Field PG M6

























































































































Search results

Summary of Contents for SIMATIC Field PG M6

Reviews:

Related manuals for SIMATIC Field PG M6

Brands by name

Popular brands

Siemens SIMATIC Field PG M6, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC Field PG M6

Reviews:

Related manuals for SIMATIC Field PG M6

Brands by name

Popular brands