Siemens SIMATIC Field PG M6 Operating Instructions Manual Download Page 41

Page: 41 / 120

Commissioning the device

5.3 Changing the display language, region and formats of the operating system

SIMATIC Field PG M6
Operating Instructions, 12/2018, A5E43198909-AA

5.3

Changing the display language, region and formats of the operating

system

Changing the settings of the logged-in user account
1.

Select: "Start > Settings > Time & language".

Make the desired changes in the following areas:
–

"Date & time"

–

"Region & language"

Changing the system account and the standard user account settings
You can change the settings for the display language, region and formats of the system

account (for example, the display language in the user login dialog) and the settings of the

standard user account (default setting for new users).
The settings of the registered user are copied to the system account and the standard user

account for this purpose.
1.

Select: "Start > Settings > Time & language".

In the "Region & language" area, for the "Add a language" option define a desired

"default" language.

Summary of Contents for SIMATIC Field PG M6

























































































































Search results

Summary of Contents for SIMATIC Field PG M6

Reviews:

Related manuals for SIMATIC Field PG M6

Brands by name

Popular brands

Siemens SIMATIC Field PG M6, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC Field PG M6

Reviews:

Related manuals for SIMATIC Field PG M6

Brands by name

Popular brands