Siemens SIMATIC ET 200X Manual Download Page 276

Page: 276 / 362

Technical Specifications

7-88

ET 200X Distributed I/O Device

EWA 4NEB 780601602-06

7.21.3

Analog value representation for the measuring ranges of the
analog inputs and outputs (SIMATIC S7 Format)

The tables in this chapter contain the digitized analog values for the measuring
ranges of the expansion modules with analog inputs and outputs.

The binary representation of the analog values is always the same, so these tables
only compare the measuring ranges and the units.

Summary of Contents for SIMATIC ET 200X











































































































































































































































































































































































Search results

Summary of Contents for SIMATIC ET 200X

Reviews:

Related manuals for SIMATIC ET 200X

Brands by name

Popular brands

Siemens SIMATIC ET 200X, Manual

Search results

Summary of Contents for SIMATIC ET 200X

Reviews:

Related manuals for SIMATIC ET 200X

Brands by name

Popular brands