Siemens SIMATIC ET 200SP IM 155-6 PN/2 HF, Manual, Page: 22 / 57

Share

Page: 22 / 57

Siemens SIMATIC ET 200SP IM 155-6 PN/2 HF Manual Download Page 22

Product overview

2.2 Functions

Interface module IM 155-6 PN/2 HF (6ES7155-6AU01-0CN0)
Manual, 10/2018, A5E03915895-AH

21

2.2.2

Real-time communication

Real-time communication

A transmission method for PROFINET IO based on cyclic data exchange with a provider-

consumer model.

2.2.3

Isochronous real-time communication

Isochronous real-time communication

A synchronized transmission method for cyclic exchange of IO data between PROFINET

devices. A reserved bandwidth within the send clock is available for the transmission. The

reserved bandwidth ensures that the IRT data is also transmitted in reserved, time-

synchronized intervals, unaffected by other high network load (e.g. TCP/IP communication or

additional real time communication).
A topology configuration is required for IRT.

Note
IO controller as sync master with IRT communication
We recommend operating the IO controller also as a sync master when configuring the IRT

communication. Otherwise, IRT- and RT-configured IO devices may fail if the sync master

fails.

You can find more information on the configuration of synchronized PROFINET devices in

sync domains in the STEP 7 online help and

●

As of STEP 7 (TIA Portal) V12, in the function manual PROFINET with STEP 7

http://support.automation.siemens.com/WW/view/en/49948856

●

As of STEP 7 V5.5, in the system manual PROFINET System Description

http://support.automation.siemens.com/WW/view/en/19292127

«
...
20
21
22
23
24
...
»

Summary of Contents for SIMATIC ET 200SP IM 155-6 PN/2 HF


























































Reviews:

No comments