manualshive.com logo in svg

Siemens SIMATIC ET 200C, Manual, Page: 140 / 333

Share
Download
Siemens SIMATIC ET 200C Manual Download Page 140

6-4

ET 200C Distributed I/O Station

EWA 4NEB 812 6119-02b

6.2

Starting Up and Testing the ET 200C Distributed I/O Station

The ET 200C distributed I/O station has been assigned a station number with
the ET 200 handheld (see Chapter 9). It is now time to start the station with
the programmer and COM ET 200 V4.x.

The ET 200C station is parameterized as follows:

1. Connect your ET 200C module via an adapter cable and programmer

connecting cable to the programmer (using interface module
CP5410-S5DOS/ST) (see Section 6.1).

2. Open the ”STARTUP/TEST” form of the COM ET 200 V.4x software

package (press <F5> in the ”FUNCTION SELECTION” form).

3. Enter the station number of the ET 200C station.

4. Confirm the entry with <F6> (ENTER).

Result:

COM ET 200 V4.x now tries to establish a connection to the station.

After the connection has been established, the station is assigned the con-
figuration data.

The station should now be coded with the current station number.

The station number can be changed using the ET 200 handheld.

Note on changing the baud rate:

Note

It is possible that the ET 200C station will not be admitted to the
SINEC L2-DP bus when an incorrect configuration is redefined and the baud
rate is changed at the same time.

Assumption

Procedure:
Select Station

Result

Rules

Changing the
Baud Rate

Startup and Test with COM ET 200

Summary of Contents for SIMATIC ET 200C














































































































































































































































































































































Reviews:

No comments