SIMATIC CP 4163-1
Operating Instructions, 12/2022, C79000-G8976-C588-01
23
Installation, connection, commissioning, removal
3
Safety notices on the use of the device
Note the following safety notices when setting up and operating the device and during all
associated work such as installation, connecting up or replacing the device.
3.1
Important notes on using the device
WARNING
Safety requirements for installation
The devices are "open equipment" according to the standard IEC 61010-2-201 or
UL 61010-2-201 / CSA C22.2 No. 61010-2-201. To fulfill requirements for safe operation
with regard to mechanical stability, flame retardation, stability, and protection against
contact, the following alternative types of installation are specified:
•
Installation in a suitable cabinet.
•
Installation in a suitable enclosure.
•
Installation in a suitably equipped, enclosed control room.
3.1.1
Notes on use in hazardous areas
WARNING
Cleaning the housing
•
In hazardous areas
Only clean the outer parts of the housing with a damp, but not wet, cloth.
•
In non-hazardous areas
Only clean the outer parts of the housing with a dry cloth.
Do not use any liquids or solvents.
WARNING
EXPLOSION HAZARD
The device must not be opened.
