Configuration
4.4 Calling the WBM
SIMATIC CC712
44
Operating Instructions, 05/2019, C79000-G8976-C503-01
Logging in
After establishing a connection between the PC and the device, the WBM opens with the
logon page.
Note
Entering the wrong user name or password
After entering an incorrect user name or incorrect password three times a lockout time of a
few minutes begins. Only after the lockout time has expired can you try to log in again.
●
User name
Enter the user name here.
●
Password
Enter the password here.
●
Logging in
Click the button to set up the connection to the WBM.
When you log in for the first time, you are prompted to change the default user data. You can
find the rules for password assignment in the section User (Page 89).
Open Source Software and links to additional information
You can find the following links at the bottom of the login page:
●
Help
Opens the online help of the WBM.
●
Open Source Software
Opens the license terms document for the Open Source Software.
If necessary, you can save the document on your PC.
●
Siemens
Opens the Siemens AG homepage.
4.4.3
Log out
Manual logout using the
button
You log out from the WBM by clicking on this button in the toolbar.
The connection to the device is terminated. All changes to the configuration data not saved
previously are lost.
