Siemens SIMATIC Box PC 627, Operating Instructions Manual

Page: 165 / 200

Detailed descriptions
16.4 BIOS Setup
SIMATIC Box PC 627
Operating Instructions, Release 05/2006, A5E00362052-03
16-47
16.4.10 Default BIOS Setup entries
Documenting your device configuration
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
Note
Print out the table below and keep the pages in a safe place once you made your entries.
BIOS Setup default settings
System parameters Defaults Custom entries
Main
System Time
hh:mm:ss
System Date MM/DD/YYYY
IDE Channel 0 Master 257MB
IDE Channel 0 Slave None
SATA Port 0 120GB SATA1
SATA Port 1 None
SATA Port 2 None
SATA Port 3 None
Memory Cache Write Back
Boot Options
Quick Boot Mode
Enabled
SETUP prompt Enabled
POST Errors All, but not keyboard
Summary screen Enabled
Diagnostic screen Enabled
Post Code/Status LPC Bus
Keyboard Features
Numlock
On
Key Click Disabled
Keyboard auto-repeat rate 30/sec
Keyboard auto-repeat delay ½ sec