Siemens SIMATIC Box PC 627, Operating Instructions Manual

Page: 159 / 200

Detailed descriptions
16.4 BIOS Setup
SIMATIC Box PC 627
Operating Instructions, Release 05/2006, A5E00362052-03
16-41
"PCI Devices" field
If the PCI devices field is selected, the following submenu appears:
3KRHQL[%,266HWXS8WLOLW\
,WHP6HOS
2SWLRQ5206FDQ
(6& ([LW
6HOHFW,WHP
6HOHFW0HQX 6HOHFW
&KDQJH9DOXHV
6XE0HQX
)
) 6HWXS'HIDXOWV
6DYHDQG([LW
(QDEOH0DVWHU
(QWHU
+HOS
)
$GYDQFHG
3&,'HYLFH6ORW
,QLWLDOL]HGHYLFH
H[SDQVLRQ520
> (QDEOHG @
>(QDEOHG@
>'HIDXOW@
/DWHQF\7LPHU
Figure 16-13 PCI Devices submenu, slot #1
[Enabled] The ROM option of the PCI module (if present) is
enabled
ROM scan option:
[Disabled] The ROM option of a PCI module is disabled.
[Enabled] This slot can be assigned master functions Enable Master
[Disabled] This slot can only operate as PCI slave.
[Default] The number of active PCI clock cycles of the
master modules is determined by this module
[0020H to
00E0H]
These settings are used to set the maximum
number of active PCI clock cycles to the selected
value.
Latency Timer
You should only use a value different from the default if the module
or its application requires it.