Siemens SIMATIC 427B-HMI/RTX Manual Download Page 3

Page: 3 / 56

Microbox 427B-RTX/ -HMI/RTX and Panel PC 477B-HMI/ -HMI/RTX
Manual, 12/2007, A5E01217837-01

Preface

Purpose of the Documentation

This documentation describes the unique features of the Microbox 427B-RTX/ -HMI/RTX

and Panel PC 477B-HMI/ -HMI/RTX products and the pre-installed system configuration.

This documentation also describes the following:
●

Differences between WinAC RTX as described in the WinAC RTX documentation and the

pre-installed, pre-configured WinAC RTX that executes on the Microbox 427B-RTX/ -

HMI/RTX and Panel PC 477B-HMI/RTX.

●

Differences between WinCC flexible as described in the WinCC flexible documentation

and the pre-installed, pre-configured WinCC flexible that executes on the Microbox 427B-

HMI/RTX and Panel PC 477B-HMI/ HMI/RTX.

Prerequisites

This documentation is intended for engineers, programmers, and maintenance personnel

who have a general knowledge of programmable logic controllers. Persons using this

documentation also need knowledge of Windows XP / Windows XPembedded operating

systems, STEP 7 programming, and PC-based automation with WinAC RTX.

Scope

This document describes the features and the operation of the Microbox 427B-RTX/ -

HMI/RTX and Panel PC 477B-HMI/ -HMI/RTX products.

Changes Compared to the Previous Version

The topic "What's New?" in the Product Overview enumerates the new features of Microbox

427B-RTX/ -HMI/RTX and Panel PC 477B-HMI/ -HMI/RTX products.

Location of Documentation

The Microbox 427B-RTX/ -HMI/RTX and Panel PC 477B-HMI/ -HMI/RTX products

documentation resides on the Documentation CD. The documentation does not reside on

fixed storage media.

Other Manuals

You can find additional information in the following documents:
●

WinCC flexible 2007 Runtime. This manual describes the complete functionality of

WinCC flexible RT 2007. WinCC flexible RT 2007 is pre-installed and pre-configured on

the Microbox 427B-HMI/RTX and Panel PC 477B-HMI/ -HMI/RTX.

Summary of Contents for SIMATIC 427B-HMI/RTX

























































Search results

Summary of Contents for SIMATIC 427B-HMI/RTX

Reviews:

Related manuals for SIMATIC 427B-HMI/RTX

Brands by name

Popular brands

Siemens SIMATIC 427B-HMI/RTX, Manual

Search results

Summary of Contents for SIMATIC 427B-HMI/RTX

Reviews:

Related manuals for SIMATIC 427B-HMI/RTX

Brands by name

Popular brands