Wiring
5.6 Wiring rules
Distributed I/O system
System Manual, 12/2016, A5E03576849-AG
87
5.6
Wiring rules
Wiring rules for the CPU/interface module and BaseUnits for I/O modules
Wiring rules for ...
CPU/interface module (supply
voltage)
BaseUnits
(push-in terminal)
Connectable cross-sections for solid cables
0.2 to 2.5 mm
2
AWG
*
: 24 to 13
Connectable cross-
sections for flexible
cables
Without end sleeve
0.2 to 2.5 mm
2
AWG
*
: 24 to 13
AWG*: 24 to 14
With end sleeve (with plas-
tic sleeve)
***
0.25 mm to 1.5 mm
2**
0.14 mm to 1.5 mm
2
AWG
*
: 24 to 16
AWG
*
: 26 to 16
With TWIN end sleeve
***
0.5 mm to 1 mm
2
0.5 to 0.75 mm
2
(see below)
AWG
*
: 20 to 17
AWG
*
: 20 to 18
Stripping length of the wires
8 to 10 mm
End sleeves in accordance with DIN 46228 with
plastic sleeve
***
8 and 10 mm long
* AWG: American Wire Gauge
** End sleeves without plastic sleeve: 0.25 to 2.5 mm
2
/AWG: 24 to 13
*** See note on end sleeves
Note
End sleeves
Optimum results with respect to a high-quality and permanent electrical connection with
maximum conductor pull forces at the same time can be achieved by using crimping dies,
preferably with smooth surfaces, which are provided, for example, with rectangular and
trapezoidal crimp cross-sections.
Due to the large number of crimping dies used in the industry, we can recommend others on
request. Crimping dies with a pronounced wave profile are unsuitable.
Summary of Contents for Simantic ET200SP
Page 1: ......
