System overview
2.4 Components
Distributed I/O system
System Manual, 12/2016, A5E03576849-AG
31
Accessories of the SIMATIC ET 200SP motor starters
Table 2- 4
SIMATIC ET 200SP motor starter accessories
Accessories
Function
Figure
3DI/LC module
The optional 3DI/LC module has three digital
inputs and one LC input. For reasons of oper-
ational safety, input LC is permanently set to
manual local mode. By parameterizing the
inputs DI1 - DI3 with motor CLOCKWISE or
motor COUNTER-CLOCKWISE, you can
control the motor in manual local mode.
The functions of the 3DI/LC module are not
relevant to functional safety.
Detailed information on the functions when
using a 3DI/LC module can be found in the
Manual
https://support.industry.siemens.com/cs/ww/e
Mechanical bracket for
BaseUnit
Use the mechanical bracket for additional
fixing of the motor starter. You can use the
mechanical bracket on 7.5 mm and 15 mm
mounting rails.
Infeed bus cover
For finger-safe termination of the infeed bus,
use the cover.
Fan
You can use the motor starter at higher ambi-
ent temperatures if a fan is installed.
Summary of Contents for Simantic ET200SP
Page 1: ......
