Operation
4.3 Charging process
SICHARGE Operating Manual ERK
Operating Manual, 02/2022, A5E48572458-AD
19
The status LED pulsating in blue indicates that current is flowing to the vehicle and the
vehicle battery is charging. The status LED lights up permanently in blue in the following
cases:
•
The vehicle is not drawing current.
–
The charging station pauses, for example, because of load management
–
The vehicle pauses the charging
•
The charging of the vehicle battery is completed.
4.3.2
Completing the charging process
Safety instructions during the charging process
DANGER
Risk of electric shock and fire
Touching live parts may cause electric shock or even death! Defective connectors or cables
may cause fire.
•
Do not kink or squeeze the charging cable. Do not draw the charging cable over sharp
edges or hot surfaces.
•
Do not use the charging station if dangerous damage or tampering is visible. Inform the
operator. Keep yourself and other persons away from the charging station.
•
Grip the power plug to pull the charging cable out of the socket. Do not grip by the cable
itself.
•
Never touch the mains plug with wet hands.
•
Do not connect or disconnect any cables during a thunderstorm.
CAUTION
Risk of accident
Ensure that the charging cable does not block any escape route or constitute a tripping
hazard. In this case, the cable becomes an obstacle that can lead to injuries. The cable could
also be ripped out from the anchoring and cause damage to the vehicle or the charging
station.
Summary of Contents for Sicharge CC AC22-ERK
Page 1: ......
