36
SICAM T 7KG966, Product Information
E50417-B1050-C493-A4, Edition 12.2012
15 Troubleshooting, Repair, Cleaning
The user is
not authorized
to repair the device when it
is defective. This is because the device contains
special electronic components that may only be
handled by the manufacturer in compliance with the
regulations for electrostatic sensitive devices (ESD).
Furthermore, hazardous voltages can lead to lethal
injuries when the work is performed improperly.
If you suspect that the device has a defect, Siemens
recommends to send the entire device back to the
manufacturer. If possible, use the original transport
packaging or an equivalent packaging.
Cleaning:
Switch off the device. Wiped the device with
a clean, dry and soft cloth. Do not use solvents.
Parameter setting of the LED
ERROR; see device manual
DHCP (LED RUN (green) is lit after the IP
address was received by the DHCP server).
Default IP address was applied by pressing
the IP-Addr. push-button.
Double IP address detected.
LEDs
Meaning
RUN
ERROR
H1
H2
C
C
ERROR
RUN
H1
H2
C
C
C
ERROR
ERROR
RUN
H1
H2
C
C
ERROR
RUN
ERROR
H1
H2
C
C
ERROR
RUN
H1
H2
C
C
ERROR
