17
QuickStart
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
4 QuickStart
Brief instructions on starting
SICAM Q80 7KG8080
for the first time.
"
Task process
"
the tree diagram on the left side of the interface; according to
the selection made here; the right side displays corresponding options, data or
lists
4.1
Installation
Install the software
Connect measurement unit to the communication network
Connect measurement with all measurement leads (observe safety guidelines for dealing with high voltages!)
Switch on measurement unit. If you are commissioning multiple devices, switch on
one at a time
and assign the
IP-address.
Set IP address with program IF-Config (
Start>program files>SICAM Q80 Manager>IF-Config
).
o
Click on the plus-sign by the network adapter in the left column
o
Click on the plus-sign for your device
o
Select the LAN branch
o
Set the IP-address
Start the
SICAM Q80 Manager
program
Prompt for device definition
"
OK
"
Device selection dialog opens
o
Select "New..."
o
Select "Network settings..."
o
"TCP/IP" must be selected
o
Select "Network search"
o
Select
SICAM Q80 7KG8080
"Add device interface"-dialog appears
"Settings for network"-dialog appears
Close with "OK"
PC searches network for SICAM Q80 7KG8080 devices
Close with "OK"
Note
If your device doesn't appear in the list, you must first call "IF-Config" and assign the device a valid
address. (Start Menu/
SICAM Q80 7KG8080
/IF-Config; rf. “
").
The device selection dialog must be in the right-hand side list
finish with "
OK
"
On the page Topology, right-click the mouse over the device
and select
the
Assistant opens.
(use the toolbar button
or menu item "
Parameter-Set / New Ctrl+N
")
Enter a name for a new measurement site
e.g. "Power Station 1"
Device is selected
Enter a name for the measurement task
e.g. "Test 1"
204
22