Siemens SICAM MMU 7KG9663 Device Manual Download Page 47

Page: 47 / 262

5 Getting Started

5.3 Electrical Connection

SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016

5.3.2

Electrical Connection of SICAM MMU

Fig. 5-3

Terminal Connection of the Supply Voltage at the SICAM MMU

Terminal connection
of the supply voltage

DANGER

Hazard due to high voltage

Non-observance will lead to death or serious injury.

Work may only be carried out by trained personnel (see Preface) who are familiar with and observe the safety
requirements and precautions.

Work may

never

be carried out if there is any hazardous voltage present.

✧

De-energize the device.

✧

Isolating device:

Connect a suitable isolating device upstream to de-energize the device. The isolating

device must be installed near the device, it must be easily accessible to the user and it must be marked
as an isolating device for the device.

✧

Secure the supply voltage with an approved (UL/IEC) fuse: 1.6 A, type C.

✧

If a melting fuse is used, a suitable approved (UL/IEC) fuse holder has to be used.

SICAM-MMU_7KG9663_US.book Page 47 Monday, December 7, 2015 12:22 PM

Summary of Contents for SICAM MMU 7KG9663







































































































































































































































































Search results

Summary of Contents for SICAM MMU 7KG9663

Reviews:

Siemens SICAM MMU 7KG9663, Device Manual, Page: 47 / 262

Search results

Summary of Contents for SICAM MMU 7KG9663

Reviews: