Siemens SICAM MMU 7KG9663 Device Manual Download Page 133

Page: 133 / 262

7 Operation

7.5 Maintenance

133

SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016

7.5.3

Presettings

7.5.3.1

Counters (Energy Counters)

To display and reset the energy counters, proceed as follows:

✧

In the navigation window, click the

Presets

menu and then

Counters

Fig. 7-50

Maintenance Tab, Preset Counters

✧

Enter the maintenance password into the

Password

field.

✧

Click

Reset energy counters

The

Counter ticks

, the calculated

Energy value

and the corresponding

Quality bits

are reset for all

energy counters. The status bar shows the

Action was successful

indication.

NOTE

“Pulse quantity” column: conversion factor from counter ticks to energy value in the displayed unit (Wh, for ex-
ample).

SICAM-MMU_7KG9663_US.book Page 133 Monday, December 7, 2015 12:22 PM

Summary of Contents for SICAM MMU 7KG9663







































































































































































































































































Search results

Summary of Contents for SICAM MMU 7KG9663

Reviews:

Siemens SICAM MMU 7KG9663, Device Manual, Page: 133 / 262

Search results

Summary of Contents for SICAM MMU 7KG9663

Reviews: