Siemens SICAM AK 3, User Manual

Page: 202 / 260

Engineering via SICAM TOOLBOX II
202
SICAM RTUs, SICAM AK 3 User Manual
Edition 07.2016, DC2-028-2.03
4.2.1.3 Generate Code
Before the loading of the open-/closed-loop control functions into the target system, the appli-
cation program code must be generated.
The code generation can be started via the CAEx plus Transformer or from "CAEx plus " via
the context menu of the basic system element (right mouse button).
The function diagram is now translated and checked by a compiler. Simultaneously the pro-
gram code is generated as instruction list (IL) in the folder “Specification”.
Vice versa, an already existing and compatible instruction list may be imported with the tool
“OPM II” (context menu of the CPU,
Instruction List
| Import ).
Via the menu
Tools
| Error state viewer the indication display of the code generation can be
activated. There, common indications (as for instance information on occupied memory space
for code and variables), as well as detected errors are recorded in detail.
Error State Viewer (Example)
The exact description of this tool is included in the SICAM TOOLBOX II CAEx plus Online
Help, chapter "Target-System Connection", section "Functions for Target-System Connec-
tion", section "Code Generation"
.
The code generation can be started independently from "CAEx plus " with the tool "OPM II"
through selection of the function
Destination systems
|
CAEx
plus… |
signal list/generate
code
. Thereby a signal list is created for the processing of the parameterized signals in the
open-/closed loop control function and read into CAEx plus .
Further details can be found in the SICAM TOOLBOX II Online Help, chapter "OPM II", sec-
tion "Transform and Load", "CAEx plus" .