Siemens SICAM 7KG85X Manual Download Page 97

Page: 97 / 281

[dw_p85x_regular_2x_1, 1, en_US]

Figure 4-6

Example: Linking 2 Indications to a Group Indication

Configuration and Value View via Web Pages

Configuration of the Group Indications

To change the settings of the group indication in the Configuration tab, proceed as follows:

•

In the navigation window, click Group indications 1-4.

[sc_Group_indication_configuration, 5, en_US]

Figure 4-7

Configuration Tab, Group Indications

•

Configure the respective parameters according to the following table.

Table 4-3

Settings for Group Indications

Parameter

Default Setting

Setting Range

Source

Only the indications for the
parameterization of the binary
outputs are displayed which
can be used according to the
current device settings.

-none-

Acc. to list box
Limit violation and group indication:
Designation can be changed during the parame-
terization.

Source inverted

No
Yes

4.2.2

Automation Functions
4.2 Group Indications

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Search results

Summary of Contents for SICAM 7KG85X

Reviews:

Siemens SICAM 7KG85X, Manual, Page: 97 / 281

Search results

Summary of Contents for SICAM 7KG85X

Reviews: