manualshive.com logo in svg

Siemens SICAM 7KG85X, Manual, Page: 148 / 281

Share
Download
Siemens SICAM 7KG85X Manual Download Page 148

EN 50160 Report

Function Description

i

i

NOTE

This function is only available in SICAM P855.

The device generates an EN 50160 report automatically or manually. According to the standard EN 50160,
the device generates the report by analyzing the measurand including power frequency, supply voltage
magnitude, flicker, voltage unbalance, harmonics, and events.
The EN 50160 report provides 2 templates and 1 user-defined mode:

•

EN 50160 LV&MV and EN 50160 HV
For the 2 templates, the limiting values are fixed, and the threshold values are referred to the standard
EN 50160: 2010.

•

User-defined
In this mode, you can configure the limiting values.

When the events happen, the data is flagged in red in the measurement records.
If the Flagging acc. IEC 61000-4-30 is set as 

yes

, the device hides flagged data in the EN 50160 report.

Configuration and Value View via Web Pages

Configuration of the EN 50160 Report

To configure the settings of the EN 50160 report in the Configuration tab, proceed as follows:

•

In the navigation window, click EN 50160 report.

6.8

6.8.1

6.8.2

Power Quality

6.8 EN 50160 Report

SICAM, SICAM P850/P855 7KG85X, Manual

147

E50417-H1040-C482-A9, Edition 03.2022

Summary of Contents for SICAM 7KG85X


























































































































































































































































































Reviews:

No comments