Siemens SICAM 7KG85X, Manual, Page: 132 / 281

Parameter Default Setting Setting Range
End time Current date/time You can edit the text box directly or
select the end time from the
calendar.
Measurement output Table Table
Evaluation via Display
Refer to 6.4.2.3 Value View via Display .
This submenu lists some frequency events.
Clearing of Frequency Events
Refer to chapter 6.4.5 Clearing of Events .
Voltage-Unbalance Events
Configuration and Value View via Web Pages
Configuring the Voltage-Unbalance Events
[sc_Param unbal events, 1, en_US]
Figure 6-18 Configuration Tab, Voltage Unbalance Events
To change the voltage unbalance event setting in the Configuration tab, proceed as follows:
•
In the navigation window, click Event records.
Table 6-12 Settings for Voltage-Unbalance Events
Parameter Default Setting Setting Range
Voltage unbalance threshold 5 % 1 % to 5 %, increments of 1 %
•
After the parameterization, click Send.
•
In the navigation window, click Activation and cancel.
•
Enter the activation password (refer to Table 2-3 ).
•
Click Activation.
Value View of the Voltage-Unbalance Events
To display the voltage-unbalance events in the Value view tab, proceed as follows:
•
In the navigation window, click Events.
•
Configure the respective parameters in the list boxes according to the following table.
6.4.3.2
6.4.3.3
6.4.4
6.4.4.1
Power Quality
6.4 Event Records
SICAM, SICAM P850/P855 7KG85X, Manual 131
E50417-H1040-C482-A9, Edition 03.2022