Siemens Set CEM CERT, Operating Instructions Manual, Page: 96 / 128

Operation
8.4 Menu-based operation
Set CEM CERT
94
Operating Instructions, 06/2021, A5E34491309-12
Analog outputs
This menu displays the analog inputs.
A maximum of 8 analog inputs are possible in the system, but only the analog inputs that
are actually present and have valid values are displayed.
The specific meaning of the displayed values (columns from left to right) is as follows:
• Designation of analog output
• Current value
• Start-of-scale value
• Full-scale value
• Current measured value
The meaning of the keys and display elements is described in the section Standard
keys/touch-sensitive elements (Page 50).