Siemens Set CEM CERT, Operating Instructions Manual, Page: 60 / 128

Operation
8.4 Menu-based operation
Set CEM CERT
58
Operating Instructions, 06/2021, A5E34491309-12
8.4.2.1 Factory settings
The Factory settings menu item is typically only used at the SIEMENS factory or by the
SIEMENS factory customer service on site.
If you gain access to this menu inadvertently, be aware that the Set CEM system may no
longer function correctly due to a possible misconfiguration.
8.4.2.2 Users
The password and the time until automatic logout can be changed in this menu. Users
can also log out manually here before the set logoff time expires.
The keys or display elements have the following meaning:
Operator control Key Meaning
F2/F3 Opens the login dialog
F4/F5 User is logged out; after pressing one of these keys, the user is no longer logged
in.
Touch-
sensitive Opens the dialog for changing the password
Touch-
sensitive Opens the dialog for changing the time for the automatic logout. The time is
entered in minutes.
Touch-
sensitive The 'User' and 'Group' buttons are set permanently to 'User' and 'Operational
User' at present.
The meaning of the remaining keys and display elements is described in the section
Standard keys/touch-sensitive elements (Page 50).