Siemens Set CEM CERT, Operating Instructions Manual, Page: 57 / 128

Operation
8.4 Menu-based operation
Set CEM CERT
Operating Instructions, 06/2021, A5E34491309-12
55
8.4.1.2 Status
This menu shows the status of all digital signals in the system. These statuses are
highlighted in color, depending on the message type. The specific meaning is as follows:
Color Meaning
Green OK
Red Fault
Orange Function check
Blue Maintenance demanded
Symbols in accordance with NE 107 are also used to display the status that is read from
the analyzers via ELAN or Modbus TCP. If communication cannot be established, the
communication status is indicated as "Error".
The meaning of the keys and display elements is described in the section Standard
keys/touch-sensitive elements (Page 50).