manualshive.com logo in svg

Siemens SENTRON PAC4200, Manual, Page: 49 / 252

Share
Download
Siemens SENTRON PAC4200 Manual Download Page 49

 

Description 

 

3.14 Password protection 

SENTRON PAC4200 
Manual, 09/2008, A5E02316180B-01 

49

 

3.14

 

Password protection 

SENTRON PAC4200 can be protected with a password. 

Scope 

The password protection is activated for write accesses via the user interface or via the 

integrated Ethernet interface. You can find more information on access protection in 

conjunction with optional communication modules in the documentation for these modules. 
MODBUS: MODBUS function codes can be used for write accesses if the password is active 

as well as to manage the password.  
The MODBUS function codes for write accesses to SENTRON PAC4200 when password 

protection is active are not described in this document. The relevant documentation can be 

requested from Technical Support. 

Format 

A four-digit, numeric password is used. 

Default 

The default password is: 0000 

See also 

Password management (Page 141) 
Technical support (Page 12) 
Advanced (Page 133) 

Summary of Contents for SENTRON PAC4200





























































































































































































































































Reviews:

No comments