Siemens SENTRON PAC3120, Manual, Page: 67 / 160

Operator control
6.1 Device interface
PAC3120 and PAC3220
Equipment Manual, 10/2019,
L1V30425208F-01
65
6.1.4 Menu navigation
The menu-based navigation is intuitive and largely self-explanatory. Only the basic structure
of the menu-based navigation will be explained below. The description and function of the
individual parameters can be found in chapter Parameter assignment (Page 69).
Menu levels
The device menu can be subdivided into four menu levels:
● Measured value level
● Main menu level
● Setting level
● Editing level
Measured value
level
Main menu level
"Settings"
Setting level Editing level
⇐
⇒
⇐
⇒
⇐
⇒
Depending on the device version and firmware status, the availability of the measured values
may vary in the measured value and main menu levels. The parameter selection options at
the setting and editing levels also depend on the device version and firmware status.
6.1.4.1 Measured value level
By default, the device is at the measured value level.
At the measured value level, the available measured values can be read off. The display
shows the measured values of the currently selected measured variable. (All possible
measured values are listed in the table in chapter Measuring inputs (Page 17). The selection
of measured values depends on the device version and connection type.)
● The and keys can be used to scroll through the measured values.
● The key can be used to call additional information.
● The key can be used to take the device to the main menu level.