Siemens SENTRON ATC6300 Manual Download Page 37

Page: 37 / 210

3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01

Functions

The following chapter contains information on:

●

Basic functions

●

Advanced functions

5.1

Basic functions

5.1.1

Setting the real-time clock

The virtual calendar clock of the ATC6300 must be set when the device is first

commissioned. You can select whether the clock is to be reset after each device restart. This

can be set using parameter P01.02 (refer to chapter P01 Settings (Page 121)).

Even if the ATC6300 is currently in operation, you can still set the real-time clock.

Procedure
1.

Select the display page Date / Time.

Press the + and – keys simultaneously to activate the adjustment of the date / time.

The value to be adjusted is then highlighted.

Change the setting.

Using the + and - keys you can jump back and forward between the hours / minutes /

seconds or between month / day / year.

The individual values are changed using the ▲ or ▼ ke

Confirm the setting by pressing the ✓ key.

Summary of Contents for SENTRON ATC6300



















































































































































































































Search results

Summary of Contents for SENTRON ATC6300

Reviews:

Siemens SENTRON ATC6300, Manual, Page: 37 / 210

Search results

Summary of Contents for SENTRON ATC6300

Reviews: