Operator control (software)
5.1 Browser-based web application
7KT PAC1200 multichannel current measuring system
System Manual, 11/2016, 2514374103-02
37
Sensor settings
In the Sensor settings, you can search for sensor bars connected to the Data Manager by
clicking the button "Rescan sensor bus".
As soon as the sensor bars are detected, they appear in the left-hand column.
The number of sensor bars is detected automatically. The sensors can be assigned
individual names, and they must be assigned to individual phases. In special applications,
the power factor can also be defined manually. If a sensor is not connected, there is also no
need for any phase assignment.
An eye symbol on the far right shows which sensors are to be compared with each other
statistically. This can be adapted individually. Up to eight sensors can be compared with
each other, regardless of whether they are located on the same sensor bar or not. The
sensors that are to be compared with each other need only be connected to the same Data
Manager.