Siemens SENTRON 5TT7 System Manual Download Page 49

Page: 49 / 64

Further information

3.2 Overview of SMS commands

3.2

Overview of SMS commands

SMS command

Description

More information

csq

Queries signal st quality of the

connection

Signal strength chapter (Page 20)

status

Queries the diagnostics page

Diagnostics chapter (Page 20)

Before commands involving read access

("read")

I/O configuration and messaging chapter

(Page 20)

Before commands involving write access

("write")

I/O configuration and messaging chapter

(Page 20)

rmui

Read out status of all universal inputs

Universal inputs chapter (Page 21)

wdonx

Set one single digital output (DO),
where "n" is the number of the output and "x" is

its status.
0 = Off, 1 = On, 2 = no change and 3 = change

over

Digital outputs chapter (Page 28)

wmdoxxxx

Simultaneously set all 4 digital outputs (DOs)

Digital outputs chapter (Page 28)

wdonTxxxx

Pulse function
The DOn output is switched for xxxxs

Digital outputs chapter (Page 28)

rdon

The status of a digital output is queried, where

"n" is the digital output's number.

Digital outputs chapter (Page 28)

ruin

The status of a universal input is queried, where

"n" is the digital input's number.

Analog inputs (Page 22) and Digital inputs

(Page 25) chapters

rall

Queries status of all I/Os.

Reading all I/O statuses chapter (Page 33)

rall<email>

The status of all I/Os are queried and sent to

the specified email address

Reading all I/O statuses chapter (Page 33)

fotap

The latest firmware is downloaded from the

server and installed on the module

Update chapter (Page 35)

fwv

Check to determine which firmware is located

on the module

Update chapter (Page 35)

cupd

Check to determine whether a more recent

version of the firmware is available on the

server.

Update chapter (Page 35)

rotac

The current configuration is uploaded to the

server from the module.

Update chapter (Page 35)

cotac

The configuration on the server is downloaded

to the module.

Update chapter (Page 35)

ccf<email>

The module sends its configuration to the

specified email address

Update chapter (Page 35)

APN,<APN

name>,<APN

username>,<APN

password>

Establishes an Internet connection until the next

restart

Network chapter (Page 37)

time

Date and time are synchronized with the

Internet.

Network chapter (Page 37)

GSM alarm module
System Manual, 06/2014, 2541304131-01

Summary of Contents for SENTRON 5TT7

































































Search results

Summary of Contents for SENTRON 5TT7

Reviews:

Siemens SENTRON 5TT7, System Manual, Page: 49 / 64

Search results

Summary of Contents for SENTRON 5TT7

Reviews: