Accessories
4.3 Connection system
3VA molded case circuit breakers with IEC certificate
Manual, 03/2019, A5E03603177010-03
229
Wire connector, 6 cables
The distribution wire connector, 6 cables is an external terminal, i.e. it projects beyond the
external contour of the breaker's termination area. It can hold up to 6 cables. One of the six
holes in the terminal can be used to implement a control wire tap.
The terminal cover extended plus the required assembly materials are supplied as standard
with all distribution wire connectors, 6 cables. This is used for insulation and provides degree
of protection IP4x at the front of the molded case circuit breaker and degree of protection
IP2x at the infeed side and load side (see chapter Auxiliary conductor terminal (Page 269)).
The table below shows all the types and sizes of cable which can be connected to a
distribution wire connector, 6 cables.
3VA1 molded case circuit breakers: