Siemens Sentron 3VA Manual Download

Page: 346 / 492

Accessories

4.9 EFB300 external function box

3VA molded case circuit breakers with UL and IEC certification

344

Manual, 01/2019, L1V30435333-01

Test mode

All inputs and outputs can be activated or deactivated manually in test mode. This can be

done to determine whether the digital outputs and the ZSI bus are functioning properly and

wired correctly.
The LED labeled "ACT" flashes to indicate that test mode is active. The powerconfig

software can also be used to test outputs.

Activating test mode and performing tests
1.

In order to activate test mode, press the <SET> button for at least 2 seconds

①

until all

the LEDs for the outputs light up briefly

②

. Test mode is activated when the LED labeled

"ACT" starts to flash

③

Summary of Contents for Sentron 3VA













































































































































































































































































































































































































































































































Search results

Summary of Contents for Sentron 3VA

Reviews:

Related manuals for Sentron 3VA

Brands by name

Popular brands

Siemens Sentron 3VA, Manual

Search results

Summary of Contents for Sentron 3VA

Reviews:

Related manuals for Sentron 3VA

Brands by name

Popular brands