21
Quick Installation Guide
Gigaset SE505 dsl/cable / -- / A31008-E505-B100-1-PED1 / qig_router_engl.fm / 07.07.2003
deutsch
en
glish
fr
an
ça
is
it
alian
o
ne
de
rl
an
ds
españ
ol
suom
i
dansk
sv
ensk
a
no
rs
k
por
tugué
s
Setting up the LAN connection
You can connect wired or wireless PCs to your Gigaset SE505 dsl/cable to create a local
network (LAN).
◆
Wireless
A wireless connection is set up using a wireless network adapter that must be
installed in your PC. This can be a Gigaset PC Card 54, Gigaset PCI Card 54 or other
802.11g or 802.11b compatible wireless network adapter.
A wireless network is defined by assigning an identical SSID to all the devices. You
should therefore enter the router's SSID in your network adapter configuration. The
factory set SSID for the router is
ConnectionPoint
.
If you use a Gigaset PC Card 54 or Gigaset PCI Card 54, enter this SSID using the
Gigaset WLAN Adapter Monitor
. Please refer to the relevant operating instructions
for further information.
Provided the correct SSID has been entered in your PC's wireless network adapter,
the wireless connection will be established automatically once you connect the
router to the power supply (see page 22).
◆
Wired
Use the Ethernet cable supplied to connect one of the LAN sockets (
LAN1
–
LAN4
)
on the back of the Gigaset SE505 dsl/cable to the Ethernet network card in your PC.
The graphic shows the various connection options. You should however connect only
one
PC to the router and then continue with the following steps. (If you wish to connect
more PCs, please turn to page 28.)
Wireless
Wireless
Wired
PC with
Gigaset PCI
Card 54
Notebook with
Gigaset PC
Card 54
Notebook with
Ethernet card
PC with
Ethernet
card
