en
41
Spray arms
Lime and remnants of food in the washing
water can block the nozzles in the spray
arms
22
and
23
and the arm
mountings .
Inspect the nozzles in the spray arms
for blocked holes due to remnants of
food.
If necessary, pull the lower arm
23
upwards and lift it off.
Unscrew the upper spray arm
22
.
Clean both spray arms under running
water.
Refit the spray arms. Ensure that the
lower arm has locked into place and the
upper one is screwed tight.
0
1
2
3
Spray arms
Fault finding
Resolving minor problems
yourself
Experience has shown that you can
resolve most problems that arise during
normal daily usage yourself, without
having to call out a service engineer. Not
only does this save costs, but it also
means that the appliance is available for
use again that much sooner. The following
list of common occurrences and their
remedies should help you identify the
causes of most problems.
Problems ...
... when the appliance is
switched on
Appliance does not start up
Fault with fuse in mains electricity
supply.
Plug not inserted in wall socket.
Appliance door not closed
properly.
Water tap not turned on.
Blocked strainer in water intake
hose.
The strainer is situated in the
Aquastop or supply-hose
connection.
