en
38
38
Intensive drying function
Activating the intensive drying function
increases the temperature during the
rinse-aid stage which gives better drying
results.
Press and hold the A programme
button, and set the main switch
1
to
ON.
Release both buttons.
Either
(ON) or
(OFF) flashes in
the numerical display
3
.
Press the A programme button to
change the setting.
Set the main switch
1
to OFF. The
new setting is stored in the dishwasher
memory.
Care and maintenance
Regular inspection and maintenance of
your appliance helps to prevent problems
from occurring. This saves time and
aggravation. You should therefore
carefully inspect the inside of your
dishwasher from time to time.
Overall condition of appliance
Check that no grease or scale has
accumulated on the inside of the
dishwasher.
If you discover any deposits:
Clean the interior of the dishwasher
thoroughly with a detergent solution.
Special dishwasher salt
Check the LOW SALT indicator
7
. Top
up with salt, if required.
Rinse-aid
Check the LOW RINSE-AID indicator
8
on the front panel or the level indicator on
the rinse-aid container
29
. Top up with
rinse-aid, if required.
Filters
The filters
25
prevent larger remnants of
food or other objects from getting inside
the pump. This residue can occasionally
clog up the filters.
The filter system consists of a filter
cylinder, a flat fine filter and, depending on
the model, a microfilter (*).
Inspect the filters for obstructions every
time the dishwasher has been used.
By unscrewing the filter cylinder, you
can remove the filter system. Remove
any food remnants and clean the filters
under running water.
