manualshive.com logo in svg

Siemens SCALANCE XR-300M, Compact Operating Instructions

Share
Download
Siemens SCALANCE XR-300M Compact Operating Instructions Download Page 78

Device:

SCALANCE

(Variant)

IEC 60068-2-6 vibration

IEC 60068-2-27 shock

IEC 60068-2-6 vibration *)

10 – 58 Hz: 0.15 mm

58 – 500 Hz: 1 g

1 octave/min,

10 cycles

15 g, 11 ms duration

6 shocks per axis

5 – 8.51 Hz: 7 mm

8.51 – 500 Hz: 1 g

1 octave/min,

10 cycles

XR324-12M

(1 x 100 to 240 VAC, data cable 

outlet at rear)

●

●

●

*) Note: When rack mounted with 4 securing points

Installation guidelines

The devices meet the requirements if you adhere to the installation and safety instructions 

contained in this documentation and in the following documentation when installing and 

operating the devices.
● "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual (

https://

support.industry.siemens.com/cs/ww/en/view/27069465

)

● "Industrial Ethernet / PROFINET - Passive Network Components" System Manual (

https://

support.industry.siemens.com/cs/ww/en/view/84922825

)

● "EMC Installation Guidelines" configuration manual (

https://support.industry.siemens.com/

cs/ww/en/view/60612658

)

WARNING

Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their target 

systems may violate the requirements and regulations for safety and electromagnetic 

compatibility.
Only use expansions that are approved for the system.

Note
The test was performed with a device and a connected communications partner that also meets 

the requirements of the standards listed above.
When operating the device with a communications partner that does not comply with these 

standards, adherence to the corresponding values cannot be guaranteed.

Approvals
9.1 XR-300M mechanical stability (in operation)

SCALANCE XR-300M

78

Compact Operating Instructions, 11/2019, A5E02661171-15

Summary of Contents for SCALANCE XR-300M



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands