manualshive.com logo in svg

Siemens SCALANCE XR-300M, Compact Operating Instructions

Share
Download
Siemens SCALANCE XR-300M Compact Operating Instructions Download Page 31

Note
During installation and operation, keep to the installation guidelines and safety notices 

described in this document and in the system manuals "Industrial Ethernet / PROFINET 

Industrial Ethernet" and "Industrial Ethernet / PROFINET passive network components".
You will find information on the system manuals in the chapter "Introduction", in the section 

"Further documentation".

5.2

Installation

Note
When installing and operating the device, keep to the installation instructions and safety-

related notices as described in this document and in the manual "SIMATIC NET Industrial 

Ethernet Twisted Pair and Fiber Optic Networks (

https://support.industry.siemens.com/cs/ww/

en/view/1172207

)".

Safety requirements for installation 
According to the IEC 61131-2 standard and therefore in accordance with the EU directive 

2006/95/EC (Low Voltage Directive), the devices are "open equipment" and in accordance with 

UL/CSA certification, they are an "open type".
To fulfill requirements for safe operation with regard to mechanical stability, flame retardation, 

stability, and shock-hazard protection, the following alternative types of installation are 

specified:
● Installation in a suitable cabinet.
● Installation in a suitable enclosure.
● Installation in a suitably equipped, enclosed control room.

5.3

19" rack mounting

WARNING

Use of approved components
● Use only approved 19" cabinets.
● Use only supplied mounting brackets.

There are several ways of fixing the mounting brackets depending on the mounting 

position required.

Mounting

5.3 19" rack mounting

SCALANCE XR-300M

Compact Operating Instructions, 11/2019, A5E02661171-15

31

Summary of Contents for SCALANCE XR-300M



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands